BEFORE YOU START
CONNECTING TO OTHER VIDEO EQUIPMENT
Rear of Unit
Other Video
Equipment
1.Use a video cable (not supplied, available at your local RadioShack store or online at www.radioshack.com) to connect the TV VIDEO OUT jack on the rear of your player to VIDEO IN jack on your TV.
2.Using the supplied audio/video cable, connect the yellow plug from the AV1 VIDEO IN jack on the rear of your player, or AV2 VIDEO IN jack on the front panel of your player, to the VIDEO OUT jack on the other equipment.
3.Using the supplied audio/video cable, connect the white and red audio plugs from the AV1 AUDIO IN R/L jacks on the rear of your player, or the AV2 AUDIO IN R/L jacks on the front panel of your player, to the AUDIO OUT jacks on the other equipment.
Notes:
•If the external equipment is a television and this audio system is close to it, you may experience interference if the TUNER function is selected while the television is working.
•While the VCR is connected to the DVD player, make sure to set your VCR to stereo mode, otherwise the activated speakers may be different than expected. See “Selecting the Listening Channel” on page 30.
•The digital connection is for DVD and VCR only.
LISTENING TO OTHER AUDIO EQUIPMENT
1.Turn on the player.
2.Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN function.
CONNECTING ANTENNAS
FM ANTENNA
Press the FM ANT. 300 terminal levers and insert the supplied FM antenna wire ends in the terminal jacks.
CONNECTING OTHER AUDIO EQUIPMENT
ANALOG CONNECTION
Use the supplied audio/video cable to connect the AUDIO OUT L/R jacks on the rear of your player to the AUDIO IN jacks.
FM Antenna 
AM Loop Antenna 
DIGITAL CONNECTION
AUse a coaxial digital audio cable (not supplied, available from RadioShack) to connect the coaxial cable to your other equipment.
BOr, use an optical digital cable (not supplied, available from RadioShack) to connect the OPTICAL OUT jack on the rear of your player to the OPTICAL IN jack on your other equipment.
A
or
B
8
AM LOOP ANTENNA
1.Insert the supplied loop antenna's plug into AM LOOP ANT. The plug fits only one way. Do not force it.
2.Snap the supplied stand onto the bottom of the AM loop antenna and place it on a flat surface.
3.Keep the antenna as far away as possible from the player, speaker cords, and power cord to prevent unwanted noise.