RCA HT35752BD manual Test the LaserDisc Player, Test the Audio CD Player

Test the System (continued)

➤Test the LaserDisc Player

See the LaserDisc player user’s guide for complete LaserDisc player operating information.

❑1. Remove the set screws from the LaserDisc player.

❑2. Press VCR2/LD on the remote to turn on the LaserDisc player, audio/video receiver, TV, and tune the TV to channel 92. This will also set the remote to operate the player.

❑3. Press OPEN/CLOSE on the player to open the disc table. Center a laser disc in the groove of the table corresponding to the size of the disc as shown below.

5-Inch CD (CDV)

8-Inch LD

3-Inch CD

12-Inch LD

CD (CDV) – Place label side up.

LD* – Place side up you want to play.

* On two-sided disc, the side facing up will play first and then the other side will play.

❑4. Press PLAY on the remote or PLAY•PAUSE on the player to close the disc table and start playing the laser disc.

❑5. Check the video and audio signals from the player.

➤Test the Audio CD Player

See the audio CD player’s use and care guide for complete CD player operating information.

❑1. Press AUDIO SHIFT, then CD on the remote or POWER on the player to turn on the CD player and audio/video receiver.

❑2. Press OPEN/CLOSE on the front of the player to open the disc table.

❑3. Load a CD. Press OPEN/CLOSE on the player to close the disc table, and PLAY to start playing the CD.

❑4. Check CD player’s audio signal.

24