Introduction
➢This guide contains instructions for installing and connecting components of the
We recommend that two people are available to install this system.
Get Ready
➤Unpack System
Important Note: Be sure to record all of the Model and Serial Numbers on the “Limited Warranty Registration” form located in the accessory kit for the owners to submit with their registration cards.
❑1. Look inside the accessory kit (ACCKIT752) for the “Installation Checkoff List.” This list is provided for each system and must be filled out for each installation.
❑2. Unpack all of the boxes.
❑3. Look inside the accessory kit (ACCKIT752) for the “Inventory Checklist.” If you are missing any items, contact
➤Check the Installation Area
After unpacking the system, check the installation area to make sure the following things are ready.
❑1. A 20 AMP dedicated duplex power source located on the rear wall directly behind the speaker opening.
❑2. For emergency situations, a system power disconnect switch should be connected to the dedicated duplex as shown on the blueprint.
❑3.
❑4. Cable TV and/or home antenna source(s) available.
❑5. Make sure the support frame for the audio/video component and software cabinet is level.
Caution: The speaker wire in the walls must be both UL listed and CL2 type. Wiring must also meet all state and local code requirements.
2