Final Installation (continued)
➤Install Glass Doors (continued)
❑3. Slide doors into hinges with the metal mounting plates toward the inside, facing the screw holes in the hinge. Secure door into each hinge by inserting the supplied 1/4” hinge screws into the hinge and gently tightening them against the metal mounting plate.
Note: The glass door which has RCA Custom Home Theatre on it goes on the left hand side of the cabinet.
Glass
Door
Inside of Door Shown
❑4. Check each door for proper alignment and adjust, if necessary, by loosening the screws and moving glass door in or out on the hinge.
❑5. Pull the foam pads out from inside of each of the push plates. Remove the paper backing from each foam pad and attach it over the top of each door as shown below making sure it is located in front of the magnetic latch.
Push
Plate
Foam
Pad
Glass
Door
❑6. Repeat the procedures for the remaining doors.
If you have any questions or are missing any components, please contact
27