RCA HT35752BD manual Install TV Cabinet, Mount the TV Cabinet

Install TV Cabinet

The TV cabinet is shipped assembled. Before final positioning of the TV cabinet in the opening, be sure to run the TV’s power cord and the connectors from the jack panel extension cable up through the square opening in the right rear of the cabinet. Be sure that the wires for the front and center speakers are accessible.

➤Mount the TV Cabinet

❑1. Place the TV’s power cord and connectors from the jack panel so that you will be able to easily feed them through the back of the TV cabinet as it is being installed.

❑2. Place TV cabinet on top of component and software cabinet. Move the TV cabinet back until the wood strip at the bottom front of the TV cabinet fits snugly into the two L-notches on top of the component and software cabinet.

❑3. Secure the TV cabinet to the component and software cabinet using

four #8 x 2-1/4” screws — two at the front and two at the rear as shown below.

❑4. Use the leveling legs in the bottom of the component and software cabinet to level the system, if necessary.

	TV Cabinet
Screw Holes		Screw Holes
Wood Strip
L-Notch	Component and Software Cabinet	L-Notch
	Leveling Legs
	Screw Holes

6