Using Your DSS® Receiver (optional with some systems)
If your system came with, or you have added, an RCA Digital Satellite System, you can press the DSS•CABLE on the remote and the DSS¨ receiver, audio/video receiver, and TV will turn on and the TV will tune to channel 90
For more detailed instructions see the satellite receiver userÕs manual.
To Watch a Program
1. Press DSS•CABLE on the remote to turn on the satellite receiver, audio/video receiver, TV, and tune the TV to channel 90
2. Press CHANNEL up or down to select channels, or press number buttons to directly access a channel. To find a channel using the
Point and Select Menu System
The receiver has interactive menus and operating guides that use the ÒPoint and SelectÓ method.
1. Press DSS•CABLE on the remote to turn on the satellite receiver, audio/video receiver, TV, and tune the TV to channel 90. This also sets the remote to control the satellite receiver.
2. Press MENU/PROGRAM to display the DSS Main Menu.
DSS Main Menu
Use the arrows to point to an item, then press SELECT
Pressing the number also selects the item.
1 Program Guide
2Attractions
3Alternate Audio
4Mailbox
5Options
6Help
0Exit
1Show the
3. ÒPointÓ to the item you want to select using the arrow buttons at the bottom of the remote.
4. ÒSelectÓ the item using the DISPLAY button on the remote.
5. Follow the
Note: You can also select a menu item by pressing the corresponding number on the remote. Press CLEAR on the remote to remove a menu from the screen.
Note: Whenever the
*DSSª is a trademark of DIRECTV, Inc., a unit of GM Hughes Electronics.
26