RCA HT60903BD, HT35713BD manual Express Recording XPR, Stopping an Express Recording in Progress

Using Your VCR (Continued)

Express Recording (XPR)

Express recording lets you record up to four hours without using the timer program feature. The VCR will turn off automatically at the end of the recording.

1.Press VCR1 on the remote to turn on the VCR, audio/video receiver, TV, and tune the TV to channel 91 (Input 1). This also sets the remote to control the VCR.

2.Insert a blank tape with safety tab in place.

3.Select a recording speed (SP, LP, or SLP) using the SPEED button on the VCR or VCRÕs remote.

4.Press CHANNEL up or down on the remote to select the channel to be recorded.

5.Press REC on the remote once to activate normal recording. Repeatedly press REC until the amount of express recording time is displayed on the TV screen. Each press of REC increases the time 30 minutes up to 4 hours.

RECORD LENGTH 0:00 CH 04

Press REC to set length

Express Display on

TV Screen

	Press		Recording
		REC	Time
		0:30	(30 Min)
	1:00		(1 Hr)
	1:30		(1 Hr, 30 Min)
			(2 Hrs)
	2:00
			(3 Hrs)
	3:00
4:00			(4 Hrs)
0:00			(XPR Turns Off)

6.Press REC to display the time remaining on the TV screen. Press REC again to increase the amount of recording time.

Stopping an Express Recording in Progress

1. Press VCR1 and then STOP within a few seconds on the remote or press POWER and then STOP within a few seconds on the VCR.

22