Using Your CD Changer
For complete operating information about your CD changer, see the CD changerÕs UserÕs Guide.
To Play a CD
1.Press CD on the remote to turn on the CD changer and audio/video receiver. This also sets the remote to operate the CD changer.
Note: If the CD changer does not turn on when you press the CD button, check to make sure that the POWER button on the front of the changer is pressed into the on position.
2. Press OPEN/CLOSE on the CD changer to open disc tray. Load disc with the label side up in the disc tray.
To load more discs press SKIP on the changer to rotate the carousel and load up to five discs at one time.
3. Press PLAY. The changer will begin playing the lowest number disc in the tray and continue to play until all of the discs are played.
4. Press STOP when you are finished playing the disc.
To Select a Specific Disc
1. Press CD on the remote to place the remote in the CD mode.
2. Press PREV CH•DISC and then the disc number on the remote or DISC NUMBER on the changer to select a specific disc.
To Select a Specific Track
1. Press CD on the remote to place the remote in the CD mode.
2. During playback, press the REW button to return to the beginning of the track that is playing. Repeatedly press REW to return to the beginning of previously played tracks.
Press the FF button to advance to the beginning of the next track. Repeatedly press FF to advance one track for each press.
29
