Sharp MX-FX13 Using Broadcast Transmission, Enter RX Station, To cancel a broadcast transmission

BACK OK

ADVANCED TRANSMISSION METHODS

USING BROADCAST TRANSMISSION

1 Perform steps 1 to 4 of "BASIC PROCEDURE FOR SENDING FAXES" (page 17).

2 Press the [BROADCAST] key.

4 Press the [OK] key and then select the next destination by entering a full fax number or pressing an auto-dial key.

After entering a full number with GHI the numeric keys, press the

[OK] key to complete the entry. PQRS If you pressed an auto-dial key

R SELECT COPY RATIO		AUTO IMAGE	OUTPUT	2-SIDED
OLUTION	ADDRESS	FORMAT	ORIGINAL SIZE	DUPLEX
OLUTION	ADDRESS	BROADCAST	ORIGINAL SIZE	DUPLEX

The destination selection screen appears.

ENTER RX STATION

:

in step 3, it is not necessary to

press the [OK] key. You can immediately press another auto-dial key for the next destination. Repeat steps 3 and 4 to select the remaining destinations.

•	If you need to delete a number for which
Note	entry has already been completed by
	pressing the [OK] key, use the [ ] or [ ]

3 Enter a full fax number with the numeric keys or press an auto-dial key (Rapid key, Speed Dial number, or group key) to select the first destination. (Page 19)

			To clear a mistake when
WXYZ			entering a full number with the
			numeric keys, press the [C] key
26	27	28	to clear one digit at a time.
A	B		C
31	32	33

F G H

36 37 38

A destination selected with a Rapid key, Speed Dial number, or group key is indicated by an icon and a number. To clear an entry, press the [C] key.

key to select the number and then press

the [C] key.

•If the selected destinations exceed the display range of the message screen, press the [ ] or [ ] key to scroll through and check the destinations.

•Destinations can also be selected using the address directory and the [REDIAL] key. Note, however, that the [REDIAL] key can only be used to select the first destination (it must be used before any other destinations are selected).

•If you use two group keys that have 50 stations each, the total number of destinations entered will be 100.

5 Continue from step 6 of "BASIC PROCEDURE FOR SENDING FAXES" on page 18.

To cancel a broadcast transmission

Note	To cancel a broadcast transmission when
	selecting destinations, press the [CA] key.
	To cancel transmission after the
	transmission procedure has been
	completed, follow the procedure in
	"CANCELLING A FAX TRANSMISSION"
	(page 25).

32