Sharp MX-FX13 SENDING A FAX DIRECTLY FROM A COMPUTER PC-Fax, Press the OK key, Special Function

ADVANCED TRANSMISSION METHODS

3 Select "RX DATA TRANSFER" with the [ ] or [ ] key.

PQ	SPECIAL FUNCTION
	PRINT
ED COPY	ENTRY
LEX SCAN	RX DATA TRANSFER
LEX SCAN
ACC

4 Press the [OK] key.

GHI

BACK OK

PQRS

5 Select "TRANSFER" with the [] or [] key.

RX DATA TRANSFER

:12345678901234 12345678901234 123456789012 TRANSFER

To cancel forwarding, select "NO TRANSFER".

6 Press the [OK] key.

OK	The machine automatically dials
	the forwarding number
	programmed in the system

settings and begins forwarding the fax or faxes.

•	To cancel a forwarding operation
Note	Press the [FAX STATUS] key, and then

cancel forwarding in the same way as a regular fax transmission. (See

"CANCELLING A FAX TRANSMISSION" on page 25.) The fax(es) that was going to be forwarded will return to print standby status in your machine.

•If forwarding is not possible because the other machine is busy or a transmission error occurs, recall attempts will be made according to the recall times setting. If forwarding is still not successful after the set number of recall attempts are made, the fax(es) will return to print standby status in your machine.

•When forwarding is performed, all faxes that have been received in memory to that point are forwarded. The page that was being printed when the problem occurred and all following pages will be forwarded.

•After a fax is forwarded, the fax data is automatically cleared from memory.

SENDING A FAX DIRECTLY FROM A COMPUTER (PC-Fax)

A document in a computer can be transmitted via the machine as a fax. Faxes are sent using the PC-Fax function in the same way as documents are printed. Select the PC-Fax driver as the printer driver on your computer and then select the Print command in the software application. Image data for transmission will be created and sent as a fax.

Fax transmission

For more information on using the PC-Fax function, see the "Operation Guide" that is installed along with the PC-Fax driver.

•	To use the PC-Fax function, the PC-Fax driver must be installed. For more information, see "INSTALLING THE
Note	PC-FAX DRIVER (THAT ACCOMPANIES THE MACHINE)" on page 51.

•This function can only be used on a Windows® computer.

•This function can only be used for transmission. Faxes cannot be received to your computer.

50