Sharp MX-FX13 Select an unused box - - - - - - with the or key, Press the OK key, Conf. Box

PROGRAMMING

[PROGRAMMING AN F-CODE CONFIDENTIAL BOX]

Follow the steps below to program an F-code confidential reception box. An F-code (sub-address and passcode) for F-code confidential reception and a print passcode to print out received faxes are programmed in each box. Up to 10 boxes can be programmed. To check the contents of a programmed box, print the following list: "PRINT - REPORT - SUB ADD SET LIST". (Page 85)

To program an F-code confidential box, follow steps 1 through 6 on page 78 and then follow the steps below.

7 Select an unused box ("- - - - - -") with the [ ] or [ ] key.

PQ	S.A.		CONF. BOX
	SBC		CO.
ED COPY	—	—	—	—	—	—
LEX SCAN	—	—	—	—	—	—
LEX SCAN
ACC	[OK]:STORE				START

8 Press the [OK] key.

GHI

BACK OK

PQRS

12 Enter a passcode (maximum 20 digits) with the numeric keys.

See steps 5 and 6 on page 69.

13 Enter the print passcode (4 digits) with the numeric keys.

	ABC	DEF	ENTER CONF. CODE
GHI	JKL	MNO
OK			____
PQRS	TUV	WXYZ
		@.-_	(0000-9999)
ACC. #-C		READ-END

The characters " " and "#" cannot be used. The print passcode cannot be omitted. Take care not to forget the programmed print passcode. If you forget the passcode, consult your Sharp dealer.

14 Press the [OK] key.

OK

9 Enter a name for the F-code confidential box (see "ENTERING CHARACTERS" on page 86).

26	27	28	29	30		S.A.CONF.BX NAME	6
	A	B	C	D	E
31	32	33	34	35
	F	G	H	I	J
36	37	38	39	40
	K	L	M	N	O
41	42	43	44	45			ABC
46	47	48	49	50	T
	P	Q	R	S
	U	V	W	XYZ	SP

Up to 36 characters can be entered for the name. A box name must be entered.

10 Press the [OK] key.

OK

11 Enter a sub-address (maximum 20 digits) with the numeric keys.

See steps 3 and 4 on page 69.

79