Sharp MX-FX13 Code confidential transmission, Sending Options Serial Polling, SUB Address TX

TRANSMISSION USING F-CODES

F-code confidential transmission

1 Follow steps 1 to 4 of "BASIC PROCEDURE FOR SENDING FAXES" (page 17) and then follow the steps below.

2 Press the [SPECIAL FUNCTION] key.

ON LINE		When the [SPECIAL
DATA	SPECIAL	FUNCTION] key is pressed, the
	FUNCTION
		special function selection
		screen appears.
LINE	COPY EXPOSURE PAPER SE
DATA
	SCAN COLOUR MODE RESOLU

3 Select "SENDING OPTIONS" with the [ ] or [ ] key.

	PQ	SPECIAL FUNCTION
		FAX PRINT HOLD
ED COPY		TIMER MODE
LEX SCAN		SENDING OPTIONS
LEX SCAN	ACC
4	Press the [OK] key.
5	Select "SUB ADDRESS TX" with the
	[ ] or [ ] key.

SENDING OPTIONS

SERIAL POLLING

SUB ADDRESS TX

SUB ADD POLLING

8 Press the [OK] key.

9 Enter the sub-address (maximum 20 digits) with the numeric keys.

WXYZ

•Characters that can be entered are numbers, "#", and spaces. However, the initial character cannot be a space.

•If you make a mistake, press the [C] key and re-enter the correct digit(s).

•If you specified a Rapid key or Speed Dial number in step 7 that has a sub-address programmed, the sub-address will appear. Go to the next step without entering a sub-address.

10 Press the [OK] key.

11 Enter the passcode (maximum 20 digits) with the numeric keys.

WXYZ

•Characters that can be entered are numbers, "#", and spaces. However, the initial character cannot be a space.

•If you make a mistake, press the [C] key and re-enter the correct digit(s).

•If you specified a Rapid key or Speed Dial number in step 7 that has a passcode programmed, the passcode will appear. Go to the next step without entering the passcode.

6 Press the [OK] key.

7 Enter the fax number of the other machine with the numeric keys, or press a Rapid key, or dial a Speed Dial number (a group key cannot be used).

			To clear a mistake when
WXYZ			entering a number with the
			numeric keys, press the [C] key
26	27	28	to clear one digit at a time.
A	B		C
31	32	33
F	G	38	H
36	37

A destination selected with a Rapid key or Speed Dial number is indicated by an icon and a number. To clear an entry, press the [C] key.

12 Press the [OK] key.

13 Press the [START] key ( ).

MNO

WXYZ

@.-_

AD-END

•Scanning begins.

•If you are scanning from the document glass and have another page to scan, change pages and press

the [START] key ( ). Repeat until all pages have been scanned and then press the key.

60