Sharp MX-FX13 appendix Sending Function, 105

SYSTEM SETTINGS

SENDING FUNCTION

These settings are used to change the default settings (initially set at the factory) for the various fax transmission functions to settings that better meet your needs.

RES. CON. SET

This setting is used to adjust the exposure level when scanning an original to be faxed. The initial setting is standard resolution and auto exposure mode.

ROTATE TX

This setting is used to select whether or not an A4, A5R or 8-1/2" x 11" size original that is oriented vertically

will be rotated to a horizontal orientation before transmission. Rotation is normally enabled, and vertically oriented originals are rotated counterclockwise. (A4, A5R and 8-1/2" x 11" size originals that are oriented

horizontally are not rotated.)

Rotation transmission can be selected separately for different original sizes. To disable a rotation setting, clear the checkbox from the appropriate setting.

1	Follow steps 1 through 6 of "INITIAL
	PROCEDURE" (page 98).
2	Select "SENDING FUNCTION" with the [			]
	or [		] key and then press the [OK] key.
3	Select "RES. CON. SET" with the [ ] or
	[	] key and press the [OK] key.
4	Select the resolution setting with the [ ] or
	[	] key and the exposure mode with the [		]
	or [		] key, and then press the [OK] key.

See page 14 for information on selecting the resolution and contrast settings.

AUTO REDUCE TX

This setting is used to have transmitted faxes reduced to match the size of the other machine's printing paper. "AUTO REDUCE TX" is normally enabled. If the setting is disabled, documents are faxed in their original size. Because the size is not adjusted to match the size of the printing paper, part of the received fax may be cut off.

1 Follow steps 1 through 6 of "INITIAL PROCEDURE" (page 98).

2	Select "SENDING FUNCTION" with the [ ]
	or [ ] key and then press the [OK] key.
3	Select "AUTO REDUCE TX" with the [ ] or
	[ ] key and then press the [OK] key.

•"AUTO REDUCE TX" is enabled and a checkmark appears in the checkbox.

•If this procedure is performed when the setting is enabled, the checkmark will be cleared and the setting disabled.

1 Follow steps 1 through 6 of "INITIAL PROCEDURE" (page 98).

2 Select "SENDING FUNCTION" with the [ ] or [ ] key and then press the [OK] key.

3 Select "ROTATE TX" with the [ ] or [ ] key and then press the [OK] key.

4 Select the desired original size and press the [OK] key.

•Size selections are A4, A5R and 8-1/2" x 11".

•When a checkmark appears in the checkbox of the selected original size, rotation transmission is enabled for that size.

•If the procedure is performed when the setting is enabled, the checkmark will be cleared and the setting disabled.

5 To change the setting for another original size, repeat step 4.

PAGE COUNTER SET

This setting lets you select whether page numbers are printed at the top of fax pages by the receiving machine. The normal setting is to have page numbers printed.

1	Follow steps 1 through 6 of "INITIAL
	PROCEDURE" (page 98).
2	Select "SENDING FUNCTION" with the [		]
	or [	] key and then press the [OK] key.
3				8
	Select "PAGE COUNTER SET" with the [		]
	or [	] key and then press the [OK] key.

•The setting is enabled (page numbers will be printed) and a checkmark appears in the checkbox.

•If the procedure is performed when the setting is enabled, the checkmark will be cleared and the setting disabled.

When a fax is sent by memory transmission, Note the page number and total number of pages

appear at the top of each fax page. When a fax is sent by Quick On-line transmission or direct transmission, only the page number appears.

105