Sharp MX-FX13 appendix Delete, Group, Select DELETE with the or key, Press the OK key, Programming

PROGRAMMING

11 To finish the storing procedure, press the [START] key ( ). If you wish to program an option such as F-code, chain dialling, transmission speed, or international transmission mode, press the [OK] key.

• If you pressed the [START] key ( ), go to step

5. If you wish to program another Rapid key or

Speed Dial number, repeat steps 5 to 11. To

exit, press the [BACK] key. Editing to that point

will be completed.

• If you pressed the [OK] key, go to the

appropriate page for the option that you wish to

edit. To program F-code settings, follow the

steps in "F-code settings" on pages 68 and 69.

To select "CHAIN DIAL", go to "Chain Dialling"

on page 69. To set the "TRANSMISSION

SPEED", go to "Transmission speed setting" on

3 Select "DELETE" with the [] or [] key.

SBC CO.

DELETE

NO DELETE

[#]:DETAIL

If you select "NO DELETE", you can press Note the key to check the destination name. If

you are deleting the destination, check the destination name and then delete the destination.

4 Press the [OK] key.

page 70. To set the "INTERNATIONAL

TRANSMISSION MODE", go to "International

transmission mode setting" on page 70.

●Deleting a Rapid key or Speed Dial number

1 In step 3 on page 72, select "DELETE"

BACK OK

You will return to the screen of GHI step 2. If you wish to delete another Rapid key or Speed PQRS Dial number, repeat steps 2 to 4. To exit, press the [BACK]

key.

with the [ ] or [ ] key.

PQ	RAPID/SPEED
	CHANGE
ED COPY	DELETE
LEX SCAN
LEX SCAN
ACC

2 Press a Rapid key ([01] to [50]) or the [SPEED] key.

• To delete a Rapid key, press the Rapid key that you wish to delete ([01] to [50]).

26	27		28	29	30
	A	B	C	D	E
31	32		33	34	35
	F	G	H	I	J
36	37		38	39	40
	K	L	M	N	O
41	42		43	44	45
	P	Q	R	S	T
46	47		48	49	50

U V W XYZ SP

•To delete a Speed Dial number, press the [SPEED] key and then enter the Speed Dial number (000 to

299) that you wish to delete with the numeric keys.

REDIAL/PAUSE PRINT

SCAN

SPEED

SYMBOLFAX

COMM. SETTING

[Editing and deleting group keys]

To edit or delete a group key, follow steps 1 through 6 on pages 66 to 67 and then follow the steps below.

Note	A group key cannot be edited or deleted in
	the following cases.

•The group key is stored in a program or F-code relay group.

●Editing a group key	6
1 Select "GROUP" with the [ ] or [ ]
key.
PQ	CHANGE/DELETE
	RAPID/SPEED
ED COPY	GROUP
LEX SCAN

LEX SCAN

ACC

2 Press the [OK] key.

GHI

BACK OK

PQRS

SPACE/–

73