Sharp MX-FX13 appendix Procedure for F-CODE Polling, Sending Options Serial Polling SUB Address TX

TRANSMISSION USING F-CODES

PROCEDURE FOR F-CODE POLLING

Make sure that a document has not been placed in the document feeder tray or on the document glass, and then follow the steps below.

• You must know the sub-address (SEP) and passcode (PWD) of the other machine's F-code polling memory

Note box.

•Serial polling (selecting multiple fax machines to be polled using a group key, Rapid keys, and Speed Dial numbers) is not possible when using F-code polling.

1 In Fax mode, press the [SPECIAL FUNCTION] key.

ON LINE		When the [SPECIAL
DATA	SPECIAL	FUNCTION] key is pressed, the
	FUNCTION
		special function selection
		screen appears.
LINE	COPY EXPOSURE PAPER SE (To select fax mode, see step 1
DATA
	SCAN COLOUR MODE RESOLUT on page 17.)

2 Select "SENDING OPTIONS" with the [ ] or [ ] key.

PQ SPECIAL FUNCTION

6 Enter the fax number of the other machine with the numeric keys, or press a Rapid key, or dial a Speed Dial number (a group key cannot be used).

			To clear a mistake when
WXYZ			entering a number with the
			numeric keys, press the [C] key
26	27	28	to clear one digit at a time.
A	B		C
31	32	33
F	G	38	H
36	37

A destination selected with a Rapid key or Speed Dial number is indicated by an icon and a number. To clear an entry, press the [C] key.

	FAX PRINT HOLD
ED COPY	TIMER MODE
LEX SCAN	SENDING OPTIONS
LEX SCAN
	ACC

3 Press the [OK] key.

7 Press the [OK] key.

OK

4

GHI

BACK OK

PQRS

4 Select "SUB ADD POLLING" with the [] or [] key.

SENDING OPTIONS

SERIAL POLLING

SUB ADDRESS TX

SUB ADD POLLING

5 Press the [OK] key.

OK

8 Enter the sub-address (up to 20 digits) with the numeric keys.

WXYZ

•Characters that can be entered are numbers, "#", and spaces. However, the initial character cannot be a space.

•If you make a mistake, press the [C] key and re-enter the correct digit(s).

•If you specified a Rapid key or Speed Dial number in step 6 that has a sub-address programmed, the sub-address will appear. Go to the next step without entering a sub-address.

9 Press the [OK] key.

OK

57