Sharp MX-FX13 appendix Using The Polling Function, In Fax mode, press the SPECIAL, FUNCTION key

ADVANCED TRANSMISSION METHODS

USING THE POLLING FUNCTION

When used in conjunction with the timer transmission function (page 33), only one polling job can be stored.

If the other machine is using polling security (see "Restricting polling access (polling security)" on page 40), your Note fax number (sender's number) must be programmed in the system settings (see "OWN PASSCODE SET" on

page 101) and your number must also be programmed in the other machine.

1 In Fax mode, press the [SPECIAL

FUNCTION] key.
ON LINE		When the [SPECIAL
DATA	SPECIAL	FUNCTION] key is pressed, the
	FUNCTION
		special function menu appears.
		(To select fax mode, see step 1
LINE	COPY EXPOSURE PAPER SE on page 17.)

DATA SCAN COLOUR MODE RESOLUT

2 Select "SENDING OPTIONS" with the [ ] or [ ] key.

PQ	SPECIAL FUNCTION
	FAX PRINT HOLD
ED COPY	TIMER MODE
LEX SCAN	SENDING OPTIONS
LEX SCAN
ACC

3 Press the [OK] key.

GHI

BACK OK

PQRS

4 Select "POLLING" with the [] or [] key.

5 Press the [OK] key.

OK

6 Enter the fax number of the other machine with the numeric keys, press a Rapid key, or specify a Speed Dial number (a group key cannot be used).

			To clear a mistake when
WXYZ			entering a full number with the
			numeric keys, press the [C] key
26	27	28	to clear one digit at a time.
A	B		C
31	32	33
F	G	38	H
36	37

A destination selected with a Rapid key or Speed Dial number is indicated by an icon and a number. To clear an entry, press the [C] key.

7 Press the [OK] key.

OK

8 Press the [START] key.

SENDING OPTIONS

POLLING

SERIAL POLLING SUB ADDRESS TX

MNO

WXYZ

@.-_

AD-END

"Polling reservation has been set." appears in the screen. After communicating with the other machine, your machine prints the received fax.

To cancel the operation

Note During communication: Cancel as explained in "Cancelling a fax transmission" on page 25. While the job is stored: Cancel as explained in "Cancelling a stored transmission job" on page 26.

36