Sharp MX-FX13 Fax Print Hold Function, Settings required for fax print hold, Press the OK key

BASIC OPERATIONS

FAX PRINT HOLD FUNCTION

Faxes are normally printed as soon as they are received.

This function is used to hold received faxes in memory rather than printing them as they are received. Faxes held in memory are printed manually all at once.

Settings required for fax print hold

If a fax is received when auto power shut-off mode has activated ("POWER ON AND OFF" in the Operation Guide for the machine), the machine returns to normal operation in order to print the fax. For this reason, if faxes are received at regular intervals, auto power shut-off will repeatedly activate and deactivate and less power will be conserved.

If you wish to maximize the benefit of auto power shut-off at night and other times when printing of received faxes is not immediately necessary, enable fax print hold. When fax print hold is enabled, receiving faxes when auto power shut-off has activated will not cause auto power shut-off to deactivate.

It is recommended that you enable and disable fax print hold as needed for your conditions of use; for example, enable fax print hold during the night and disable it during the day.

• When fax print hold is enabled and received faxes are held in memory, the DATA indicator above the [FAX] key

Note on the operation panel blinks and a message appears in the display. (When the received faxes are printed, the indicator stops blinking and the message no longer appears.)

•If the remaining free memory reaches 0%, fax reception will no longer be possible. For this reason, it is important to constantly make sure that sufficient free memory remains and frequently print received faxes. The percentage of free memory remaining appears in the base screen of fax mode. (Page 9)

Enabling fax print hold

If fax print hold is prohibited using "DISABLE FAX PRINT HOLD" (page 104) in the system settings, it will not be

Note possible to enable it.

2

1 In Fax mode, press the [SPECIAL FUNCTION] key.

Begin the following procedure from the base screen of Fax mode.

ON LINE		Press the [SPECIAL
DATA	SPECIAL	FUNCTION] key to display the
	FUNCTION
		special function menu.
		(To select fax mode, see step 1
LINE	COPY EXPOSURE PAPER SE on page 17.)

DATA SCAN COLOUR MODE RESOLUT

2 Select "FAX PRINT HOLD" with the [ ] or [ ] key.

PQ	SPECIAL FUNCTION
	FAX PRINT HOLD
ED COPY	TIMER MODE
LEX SCAN	SENDING OPTIONS
LEX SCAN
ACC

3 Press the [OK] key.

GHI

BACK OK

PQRS

4 Select "SETTING" with the [] or [ ] key.

FAX PRINT HOLD

PRINT HOLD DATA

SETTING

5 Press the [OK] key.

OK

29