Sharp MX-FX13 appendix S.A. Conf. Box, Change/Delete, Press the OK key, the or

PROGRAMMING

[PROGRAMMING F-CODE PUBLIC (POLLING MEMORY) BOXES]

This setting is used to program a box to store document data for remote transmission when polled by a machine that supports F-Code communication. Up to 10 boxes can be programmed.

To check the contents of a programmed box, print the following list: "PRINT - REPORT - SUB ADD SET LIST" (page 85).

To program an F-code public box, follow steps 1 through 6 on page 78 and then follow the steps below.

7 Select an unused box ("- - - - - -") with the [ ] or [ ] key.

PQ	S.A.		MEM		POLLING
	SBC		CO.
ED COPY	—	—	—	—	—	—
LEX SCAN	—	—	—	—	—	—
LEX SCAN
ACC	[OK]:STORE				START

8 Press the [OK] key.

GHI

BACK OK

PQRS

9 Enter a name for the F-code public box (see "ENTERING CHARACTERS" on page 86).

26	27	28	29	30		S.A. M-POLL NAME
	A	B	C	D	E
31	32	33	34	35
	F	G	H	I	J
36	37	38	39	40
	K	L	M	N	O
41	42	43	44	45		ABC
46	47	48	49	50	T
	P	Q	R	S
	U	V	W	XYZ	SP

Up to 36 characters can be entered for the name. A box name must be entered.

[EDITING AND DELETING F-CODE MEMORY BOXES]

To edit or delete an F-code box (F-code confidential box, F-code relay group box, or F-code public box), follow steps 1 through 6 on page 78 and then follow the steps below.

Note that an F-code confidential box or F-code public box cannot be edited or deleted if it contains document data.

7 Select "S.A. CONF. BOX", "S.A. RELAY GRP", or "S.A. MEM POLLING" with the [ ] or [] key.

PQ	CHANGE/DELETE
	S.A. CONF. BOX
DED COPY	S.A. RELAY GRP
LEX SCAN	S.A. MEM POLLING
LEX SCAN
ACC

8 Press the [OK] key.

GHI

BACK OK

PQRS

•If you selected "S.A. CONF. BOX" in step 7, follow the steps in "EDITING/DELETING AN F-CODE CONFIDENTIAL BOX" below.

•If you selected "S.A. RELAY GRP" in step 7, follow the steps in "EDITING AND DELETING F-CODE RELAY GROUPS" on page 83.

•If you selected "S.A. MEM POLLING" in step 7, follow the steps in "EDITING/DELETING F-CODE

PUBLIC BOXES" on page 84.		6
[EDITING/DELETING AN F-CODE CONFIDENTIAL BOX]
9 Select "CHANGE" or "DELETE" with
the [ ] or [	] key.
PQ	S.A. CONF. BOX
	CHANGE
DED COPY	DELETE
LEX SCAN

LEX SCAN

ACC

10 Press the [OK] key.

11 Enter a sub-address (maximum 20 digits) with the numeric keys.

See steps 3 and 4 on page 69.

12 Enter a passcode (maximum 20 digits) with the numeric keys.

See steps 5 and 6 on page 69.

10 Press the [OK] key.

GHI

BACK OK

PQRS

•If you selected "CHANGE" in step 9, follow the steps in "Editing an F-code confidential box" on page 82.

•If you selected "DELETE" in step 9, follow the steps in "Deleting an F-code confidential box" on page 82.

81