Sharp MX-FX13 Programming, Editing, And Deleting F-Code Memory Boxes, Sub Add Setting, Entry

PROGRAMMING, EDITING, AND DELETING F-CODE MEMORY BOXES

The procedure for programming a box for F-code transmission is explained here. There are three types of F-code boxes: F-code public boxes (page 81), F-code confidential boxes (page 79), and F-code relay group boxes (page 80). F-code boxes are programmed, edited, and deleted as explained below.

PROGRAMMING AN F-CODE MEMORY BOX

A box name, sub-address, passcode, and the appropriate functions are programmed in an F-code box.

•	When programming a new F-code box, a sub-address that is already programmed in another box cannot be
Note	used. However, the passcode can be the same as a passcode used in another box.

•A passcode can be omitted.

•Up to 10 F-code boxes of each type can be programmed. If 10 F-code boxes of one type have already been programmed, a warning message will appear and you will not be able to program a new box. Delete any unused F-code boxes (page 81) and then program the new box.

1 In Fax mode, press the [SPECIAL FUNCTION] key.

Begin the following procedure from the base screen of Fax mode.

ON LINE		When the [SPECIAL
DATA	SPECIAL	FUNCTION] key is pressed, the
	FUNCTION
		function menu screen appears.
		(To select fax mode, see step 1
LINE	COPY EXPOSURE PAPER SE on page 17.)

DATA SCAN COLOUR MODE RESOLUT

5 Press the [OK] key.

OK

6 Select "S.A. CONF. BOX", "S.A. RELAY GRP", "S.A. MEM POLLING", or "CHANGE/DELETE" with the [] or [] key.

2 Select "ENTRY" with the [ ] or [ ] key.

PQ	SPECIAL FUNCTION
	ORIGINAL STORE
ED COPY	PRINT
LEX SCAN	ENTRY
LEX SCAN
ACC

3 Press the [OK] key.

GHI

BACK OK

PQRS

4 Select "SUB ADD SETTING" with the [] or [] key.

•To program an F-code confidential box, select "S.A. CONF. BOX" and press the [OK] key. Next, follow the steps in

"PROGRAMMING AN F-CODE CONFIDENTIAL BOX" on page 79.

•To program an F-code relay group (box), select "S.A. RELAY GRP" and press the [OK] key. Next, follow the steps in

"PROGRAMMING AN F-CODE RELAY GROUP" on page 80.

•To program an F-code public (polling memory) box, select "S.A. MEM POLLING" and press the [OK] key. Next, follow the steps in "PROGRAMMING F-CODE PUBLIC (POLLING MEMORY) BOXES" on page 81.

SUB ADD SETTING S.A. CONF. BOX

S.A. RELAY GRP S.A. MEM POLLING CHANGE/DELETE

SUB ADD SETTING S.A. CONF. BOX

S.A. RELAY GRP S.A. MEM POLLING CHANGE/DELETE

SUB ADD SETTING S.A. CONF. BOX S.A. RELAY GRP

S.A. MEM POLLING CHANGE/DELETE

ENTRY

DIAL

PROGRAM

SUB ADD SETTING

•To edit or delete an F-code confidential box, F-code relay group, or F-code public box, select "CHANGE/DELETE" and then press the [OK] key. Next, follow the steps in

"EDITING AND DELETING F-CODE MEMORY BOXES" on page 81.

SUB ADD SETTING S.A. CONF. BOX S.A. RELAY GRP

S.A. MEM POLLING

CHANGE/DELETE

78