Sharp MX-FX13 Printing documents in the Public Box, Time, Select 1 TIME or REPEAT with the or key

ADVANCED TRANSMISSION METHODS

7 Select "1 TIME" or "REPEAT" with the [ ] or [ ] key.

SELECT SENDING

1 TIME

REPEAT

If you select "1 TIME", the document data is automatically cleared from memory after your machine is polled once. If you select "REPEAT", the document data in memory can be used repeatedly.

If you selected "ADD" or "CHANGE" in step 6, the transmission settings selected when the previous document was scanned into the Public Box will be replaced by the settings that you will select this time.

8 Press the [OK] key.

OK

9 Press the [START] key ( ).

MNO	• Scanning begins.
WXYZ	• If you are scanning from the
@.-_	document glass and have
AD-END	another page to scan, change
	pages and press the [START]
	key ( ). Repeat until all
	pages have been scanned
	and then press the key.

10 Make sure that the reception mode is set to auto reception.

Transmission begins when the other machine calls and polls your machine.

To cancel scanning

Note	To cancel scanning of a document while
	scanning is in progress, press the [C] key. To
	erase the documents in the Public Box,	3
	follow the procedure in "Deleting documents
	from the Public Box" (page 40).

Printing documents in the Public Box

To check the document that is stored in the public box, follow these steps to print it out.

1 Follow steps 2 to 6 of "Scanning a document into polling memory (the Public Box)" (page 38) and then follow the steps below.

2 Select "PRINT" with the [ ] or [] key.

PQ	ORIGINAL
	ADD
ED COPY	CHANGE
LEX SCAN	DELETE
LEX SCAN
ACC	PRINT

3 Press the [OK] key.

Printing begins automatically.

GHI

BACK OK

PQRS

39