Sharp MX-FX13 appendix Procedure for Using the System Settings, Initial Procedure, Count, Fax

PROCEDURE FOR USING THE SYSTEM SETTINGS

The system settings can be accessed from any mode (copy, fax, print, and scan mode). When the setting is completed, you will return to the previous mode.

•Faxes cannot be sent or received while a system setting is being used.

•A system setting cannot be used while a fax is being sent or received, while a voice call is being made, or while a received fax is being printed.

INITIAL PROCEDURE

1 Press the [SPECIAL FUNCTION] key.

ON LINE

DATA SPECIAL

FUNCTION

LINE	COPY	EXPOSURE	PAPER SE
DATA
	SCAN	COLOUR MODE	RESOLU

2 Select "SYSTEM SETTINGS" with the [ ] or [ ] key.

PQ	SPECIAL	FUNCTION
	DISPLAY CONTRAST
ED COPY	TOTAL	COUNT
LEX SCAN	SYSTEM	SETTINGS
LEX SCAN

ACC

3 Press the [OK] key.

GHI

BACK OK

PQRS

5 Select "FAX" with the [ ] or [ ] key.

MODE SELECT

COPIER

PRINTER

SCANNER

FAX

To use a system setting for copy mode, select "COPIER".

6 Press the [OK] key.

OK

7 Select a setting for the desired setting as explained on the following pages.

Settings for the following functions are available: LIST PRINT/SET (page 99)

INITIAL SETTING (page 100) SENDING FUNCTION (page 105) RCV. FUNCTION (page 108) POLLING SECURITY (page 111)

4 Enter the five-digit administrator password with the numeric keys.

	ABC	DEF	Enter	admin
GHI	JKL	MNO	password.
OK
PQRS	TUV	WXYZ
		@.-_	ADMIN	PASSWORD:
ACC. #-C		READ-END		-----

•As you enter each digit, "-" changes to "".

•If make a mistake, press the [C] key and re-enter the number.

•If this is the first time you are programming the administrator password, enter the factory default code. (See "ADMINISTRATOR PASSWORD NUMBER: FACTORY SETTING" in the Operation Guide for the machine.

8 Press the [CA] key to exit the settings.

•	To move back to the previous screen,
Note	press the [BACK] key.

•To cancel a setting before it is completed, press the [CA] key.

•See "ENTERING CHARACTERS" (page 86) for the procedure for entering letters.

98