Sharp MX-FX13 appendix Select Sending Memory TX, Direct TX, Select TX with the or key

BASIC OPERATIONS

Transmission settings (memory transmission mode and direct transmission mode)

Transmission modes include memory transmission, where the original is temporarily scanned into memory before transmission, and direct transmission, where the original is transmitted directly without being scanned into memory. There are two types of memory transmission: "Storing a transmission" (page 23), where all pages of the original are scanned into memory before transmission begins, and "Quick online transmission" (page 24), where the destination is dialled after the first page is scanned and the remaining pages are transmitted as they are scanned.

During a memory transmission, it may happen that the memory becomes full while the originals are being scanned. (See "If the memory becomes full during transmission of a stored transmission job" on page 23 and "If the memory becomes full during a quick online transmission" on page 24.) The number of pages that can be stored in memory varies depending on the content of the pages, the transmission settings, and whether memory has been added.

If there are too many pages and memory transmission is not possible, you can press the [COMM. SETTING] key to switch from memory transmission to direct transmission. When direct transmission is used, transmission begins after the current job is completed, allowing you to give priority to a transmission job. As such, direct transmission is a convenient means of performing an interrupt transmission when there are a large number of stored transmission jobs. To switch between memory transmission and direct transmission, see the following "Faxing by direct transmission".

When transmission is performed manually using an extension phone connected to the machine or using on-hook

Note dialling, direct transmission is automatically selected. (Memory transmission is not possible.)

Faxing by direct transmission

1 Perform steps 1 to 4 of "BASIC PROCEDURE FOR SENDING FAXES" (page 17).

2 Press the [COMM.SETTING] key

SPEED	The communication settings
SYMBOL	FAX screen appears.
COMM. SETTING
SPACE/–

The communication settings screen can Note also be displayed from the function selection

screen.

Press the [SPECIAL FUNCTION] key to display the special function selection screen, select "COMM. SETTING" with the [ ] or [ ] key, and press the [OK] key.

3 Select "TX" with the [ ] or [ ] key.

PQ	COMM. SETTING
	TX
ED COPY	RX
LEX SCAN
LEX SCAN
ACC

4 Press the [OK] key.

GHI

BACK OK

PQRS

5 Select "DIRECT TX" with the [] or [] key.

SELECT SENDING

MEMORY TX

DIRECT TX

6 Press the [OK] key.

OK

7 Dial the fax number.

	ABC	DEF	Group dialling cannot be used.
GHI	JKL	MNO
OK
PQRS	TUV	WXYZ
		@.-_
ACC. #-C		READ-END

22