Sharp MX-FX13 appendix Initial Procedure For Entering Characters, Entering numbers example

PROGRAMMING

INITIAL PROCEDURE FOR ENTERING CHARACTERS

Entering alphabetical characters (example: TPS)

1 Open the Rapid key overlay.

ENTER NAME

ABC

To switch between upper case letters and lower case letters, press the [SHIFT] key.

2 Enter "T", "P" and "S" with the letter keys.

26	27	28	29	30		ENTER NAME
	A	B	C	D	E
31	32	33	34	35		TPS
36	37	38	39	40	J
	F	G	H	I
	K	L	M	N	O
41	42	43	44	45		ABC
46	47	48	49	50	T
	P	Q	R	S
	U	V	W	XYZ	SP

The letters are stored and the cursor moves to the space after the letters.

To change a character, press the [C] key. Note The character directly to the left of the

cursor is cleared.

If the cursor is over a character, that character is cleared.

Entering numbers (example: 123)

1 Enter "1", "2", and "3" with the numeric keys.

	ABC	DEF	ENTER NAME
GHI	JKL	MNO	123
OK
PQRS	TUV	WXYZ
		@.-_	ABC
ACC. #-C		READ-END

• To change a character, press the [C]

Note key. The character directly to the left of the cursor is cleared.

•If the cursor is over a character, that character is cleared.

Entering symbols

1 Press the [SYMBOL] key.

REDIAL/PAUSE	PRINT	SYMBOL
SPEED	SCAN	!	"	#		%	&	'	(
SYMBOL	FAX	)	<	+	,	-	. /		:
COMM. SETTING		;		=	>	?	@	[	\
SPACE/–									1/	2

2 Select the symbol that you wish to enter with the [ ][ ][][] keys.

PQ	SYMBOL
	!	"	#	,	%	&	'	(
LEX SCAN	)		+		-	. /		:
ED COPY	;	<	=	>	?	@	[	\
ACC
LEX SCAN

1/ 2

To move to the next page, move the cursor to the bottom line and press the [ ] key. To move back to the previous page, move the cursor to the top line and press the [ ] key. You can also change pages by pressing the [] key when the cursor is at the right end of the bottom line, or the [] key when the cursor is at the left end of the top line.

3 Press the [OK] key.

ENTER NAME

BACK OK	GHI	#
	PQRS

ABC

The symbol selected with the cursor is entered and you return to the character entry screen.

If the Rapid key overlay is opened or closed Note while a symbol is being selected, the symbol currently selected with the cursor is entered

and you return to entry mode.

88