Using Your Audio/Video Receiver
To Set Surround Modes for Each Input
1.Press the Input you want to set the surround mode for. (TV, VCR1, VCR2•LD, DSS, etc.)
2.Set the surround mode by repeatedly pressing the SURROUND button on the remote or the SURROUND MODE button on the receiver until the surround mode you want is selected.
¥If the receiver does not toggle through the surround modes when you press the SURROUND button, press the
3.Press 1 to Begin setup. Just follow the directions on the screen.
¥Once the surround mode has been selected, the receiver will always go to that surround mode when that input is selected.
Use this method to set up all inputs.
17