RCA J32HE720 Vesa Standard TV Mounts 32/42 inches, General Guidelines Choosing a location for

Chapter 1: Connections and Setup

You must use a UL listed wall mount or the DTI Services, LLC DTI-006 Wall Mount Bracket whenever Wall Mounting this television.

A skilled person should be contacted to perform the installation of the television and wall mount. Specification of a generic "UL Listed wall mount" should additionally include : minimum weight that the mount must be able to support, minimum screen size that the mount must be able to support, instructions furnished as part of the wall mount must be closely followed, the wall mount must be suitable to support the type of television under consideration.

Vesa Standard TV Mounts - 32/42 inches

The following examples are VESA Standard wall mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instructions provided with the TV stand that will be used to mount the TV.

General Guidelines: Choosing a location for		Typical Wall Standard Type Mount with Swivel Bracket
installing a VESA Standard Mount
	A
B
Model	VESA (A*B)
J32HE720	200 X 100mm
J42HE820	400 X 400mm

Be sure the style of stand selected is capable of supporting the weight of the TV.

If the mount will be on a wall, a typical wooden stud behind the wall board would be the pre- ferred choice for a location to attach the wall mount. The wall mount location chosen should be appropriate for drilling holes and have available the required power source as well as antenna/cable and other equipment leads.

For pedestal-type mounts, a sturdy surface on a desk or other similar flat table-like surface would be the appropriate location for mounting a pedestal-style TV stand. (Some stands are portable and can be moved from one location to another.) Be sure all safety considerations are followed.

Most stands are designed so that the wiring would be threaded through the stand itself or a loop- through style clamp so that the wiring is neatly bunched and not strung in such a way as to create a potential hazard to the user.

Caution: Tightening wall mount screws that are too long could cause damage to the internal components of this television.

Use M5 X “L” bolts to mount LED. (“L” = Wall Mount bracket thickness + 0.5 inch or below for J32HE720)

Use M6 X “L” bolts to mount LED. (“L” = Wall Mount bracket thickness + 0.3 inch or below for J42HE820)

Note

-Image shown may differ from your TV.

-Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.

18 Chapter 1