Chapter 1: Connections and Setup
You must use a UL listed wall mount or the DTI Services, LLC
A skilled person should be contacted to perform the installation of the television and wall mount. Specification of a generic "UL Listed wall mount" should additionally include : minimum weight that the mount must be able to support, minimum screen size that the mount must be able to support, instructions furnished as part of the wall mount must be closely followed, the wall mount must be suitable to support the type of television under consideration.
Vesa Standard TV Mounts - 22/26 inches
General Guidelines: Choosing a Location for installing a VESA Standard Mount
To the right are some examples of VESA standard mounts. Since there are numerous types of stands and mounts available, only a few are shown here. Refer to the instructions provided with the TV stand that will be used to mount the TV. Be sure the style of stand selected is capable of supporting the weight of the TV and is appropriate for the application.
Wall Mounts | Typical Wall Standard Type Mount |
with Swivel Bracket |
If the mount will be on a wall, a typical wooden stud behind the wall board would be the pre- ferred choice for a location to attach the wall mount. The wall mount location chosen should be appropriate for drilling holes and have available the required power source as well as antenna/cable and any other equipment leads as necessary.
Pedestal Mounts and Stands
A sturdy surface on a desk or other similar flat
Most stands are designed so that the wiring is threaded through the stand itself or a loopthrough style clamp so that the wiring is neat- ly bunched and not strung in such a way as to cre- ate a potential hazard to the user.
(Some stands are portable and can be moved from one location to another.) Be sure all safety consid- erations are followed.
Typical Pedestal Type Mount with
Swivel Bracket
Caution: Tightening wall mount screws that are too long could cause damage to the internal components of this television.
Use M4 X “L” bolts to mount LED. (“L” = Wall Mount bracket thickness + 0.3 inch or below for J22CE820)
Use M5 X “L” bolts to mount LED. (“L” = Wall Mount bracket thickness + 0.3 inch or below for J26CE820)
Note
-Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.
Chapter 1 | 17 |