Chapter 7: Using the TV's Features
Screen Mode
You can watch the screen in various picture formats. Screen size selection depends on the type of video input.
1.Press the MENU button to enter the
2.Press the OK button and then press the Down or Up button to select Screen Mode.
3.Press the Left or Right button to select Auto, Normal, Letterbox, Panorama, Zoom or Just Scan.
4.Press the MENU button to return to the previous menu.
•Auto
When your set receives the wide screen signal, it will change automatically the picture format that has been sent.
•Normal
This selection is used to fill the entire screen with the image so no black bars appear
•Letterbox
Following selection will lead you to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides.
•Panorama
When your set receives the wide screen signal, when selected it will adjust the picture horizontally, in non- linear proportion, to fill the entire screen.
•Zoom
When your set receives the wide screen signal, when selected it will adjust the picture horizontally, in nonlinear proportion, to fill the entire screen.
•Just Scan
This mode is 0% overscan mode for 720p, 1080i, 1080p source when input source is HDMI.
Setup
|
| OSD Language | English | F G | |
|
| Input Source | TV | F G | |
|
|
|
|
|
|
|
| Screen Mode | Normal | F G |
|
|
| Caption |
| G | |
|
| Time Setup |
| G | |
|
| Reset Default |
| G | |
|
|
| |||
|
|
|
|
|
|
|
|
| Select | MENU Back | |
52 | Chapter 7 |
