You are having problems with the HDMI Connection.

Make sure the HDMI or DVI component is turned on and the cables are firmly connected. If problems still occur, turn off your component and reconnect it. Reset the power by unplugging the power cord and plugging it back in.

If you are tuned to the HDMI 1 or HDMI 2 INPUT and you’re receiving Unusable Signal message onscreen, press the INFO button on the remote. If Acquiring Channel appears in the Channel Banner, the HDMI or DVI device isn’t responding. Contact the manufacturer of the HDMI or DVI device for further assistance.

If you tune to the HDMI 1 or HDMI 2 INPUT and you see snow, the video goes in and out, or the video takes a long time to appear, your HDMI or DVI component is having trouble sending video information to the TV. Re-connect your device. Reset the power by unplugging the power cord and plugging it back in. If problems persist, try connecting the Y Pb Pr jacks if they are available or contact the manufacturer of the HDMI or DVI component for further assistance.

If you have black bars on each side of your picture, the component you connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p or 1080i.

480i signals aren’t supported by the HDMI2/DVI or HDMI1 INPUT

The remote control doesn’t work.

Something might be between the remote and the remote light sensor on the front of the TV. Make sure there is a clear path.

The remote may not be aimed directly at the TV.

The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote.

(Note: If you remove the batteries, you may have to reprogram the remote to operate other component.)

You are experiencing problems with V-Chip/Parental Controls.

If the rating limits don’t work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select Parental Control, select Lock Parental Control.

I don’t remember my password and I want to unlock the TV.

If you forget your password, turn the TV off. Simultaneously press and hold VOL UP on the side panel and CANCEL on the remote for 10 seconds. Next time you enter the Parental Control Menu, enter a new password.

The V-Chip won’t let me watch a program even though it’s not rated as violent.

Maybe the movie was given an NR (Not Rated) status. After you block movie ratings, you must set NR to View Separately in order to view movies with an NR rating.

What Else Can I Do?

If you’ve been through the Troubleshooting section and nothing has fixed your problem, try rebooting your TV. Note that after a reboot, you may need to run your TV through the setup process again. To do a reboot, unplug the power cord from the wall outlet or power strip. Keep your TV unplugged for about 5 minutes. Then plug in the TV and turn it on. See if the problem is fixed. If the problem remains, then please click on the Customer Support Menu at www.rca.com/television for updated FAQs or contact RCA Customer Support at the support number provided in your Warranty under How To Get Service.

Other Information Chapter 5

43

Page 43
Image 43
RCA L40HD36 warranty You are having problems with the Hdmi Connection, Remote control doesn’t work, What Else Can I Do?