RCA NCJ11 owner manual Thechannelguidefeatureletsyou, StoppingChannel Guide

Thechannelguidefeatureletsyou

display several channels at the same time so you can quickly review what

programs are available.

Note: Channels 2-13 were programmed into the channel memory at the factory.

These are the channels that will appear during channel guide unless you

autoprogram the channel memory or add and erase channels as described on

page 24.

ZOOM Buttons

PIP OFF SWAP

©

CHAN GUIDE Button

-StartingChannel Guide

(with remote only)

To start channel guide, press the

CHAN GUIDE button.

Note: The remote control must be in the

"TV Mode". Pressing the TV button puts it in the "TV Mode".

•The screen will display all the channels that are programmed into channel memory, 12 at a time.

•Each little screen will display a stop- action picture that will be continuously updated.

•While the 12 channels are on the screen, you can use the ZOOM button

to enlarge the picture and then use the arrow buttons to move around the

screen. To return to normal size, press OUT.

Note: When using the ZOOM feature, you will see a mosaic pattern as the picture is made larger.

•To select one of the channels being displayed in the channel guide, press the two corresponding number buttons for that channel.

-StoppingChannel Guide

•To select one of the channels being displayed in the channel guide, press

the two corresponding number buttons for that channel. That will

stop channel guide and take you directly to the channel you selected.

•Another way to stop channel guide is to press CHAN GUIDE. The little screens will disappear, and the TV will return to the original channel you were watching.

13