RCA NCJ11 owner manual Programming Remote to Control, Audio Equipment

The digital remote control that came packed with your TV is also capable of controlling a compatible audio component.

To program the remote just press the AUDIO button, then press the ID button, then enter the two-digit code number for your brand of audio equipment. _

-Programming Remote to Control

1.Refer to the chart below to find the code number that corresponds to the brand name of your audio equipment. If more than one number is listed, you may need to

try each one separately to find the one that works.

2.Press the AUDIO button on remote

(depending on which button you want to program).

3.Press ID button on remote.

o Press two number buttons (first one, then the other) to enter the code number for your brand of audio equipment.

Note: You must press the two number buttons within three seconds of

pressing the ID button.

5.Point the remote at the audio

equipment and press the OFF/ON button to test the code number.

•If the right number was entered, the audio equipment will turn on.

•If the audio equipment does not

react to the remote, repeat steps 1 thru 5 with another code number.

Audio Equipment

Operating Notes:

After the AUDIO button is programmed, the buttons described below will operate the basic functions of most audio equipment. Depending on the age, brand, model, and type of audio equipment, some models may not be able to respond to all the function buttons listed below. You will want to experiment with each button to determine the exact function for your component.

•OFF/ON: Press to turn on component. Press again to turn off. Some components will turn on automatically when you press this button.

•VOLUME: Press to change volume level.

•CHANNEL: Press to select the next higher or lower channel in the component's channel memory.

•Number Buttons: Press two numbers to directly select a channel.

•PLAY: Press to start component playing.

•PAUSE: Press to pause play or record. To release pause, press again.

•STOP: Press to stop whatever the

component is doing: playing, recording, rewinding, etc.

•REWIND: Press while component is stopped to rewind tape.

•FF (Fast Forward): Press while component is stopped to fast forward tape.

•RECORD: Press to start recording.

•ANT (Antenna): Performs various functions depending on the type of equipment. Experiment with this button.

Note: Refer to the information sheet packed

with your remote control for the latest list of brand names and code numbers. Because this

list of brand names is continually growing, the

information sheet packed with your remote control may be a later version of this list and contain additional brands and/or code numbers.

	AMP		AM/FM		CD		TAPE	PHONO	AUX
Ads	O1
AKAI	02,08								04
Dimensia			03		07		06	05
Dynamic Bass			29		25		26,27	28
Fisher	23
JVC	16		30,35		32		33,34		31
Kenwood	17
Kyocera	09
Marantz	22
Mitsubishi	15
Nakamichi	20	I
Panasonic	12		38		36		37
Pioneer	14		42		39		40,41	05
RCA	24		03		07,43,44		06		04,54
Sansui					45	I
Sherwood	11,13		49		46			47
Sony	21						48,53
Teac	10	P	52	[	50
Technics						,	51

II

Yamaha18,19I

44