![](/images/new-backgrounds/1130008/13000823x1.webp)
Only the buttons that are used to control the TV are described here. The rest of the buttons are used to
operate VCRs (pages
VCR1 VCR2
@ |
| CABLE | AUDIO |
|
|
|
| ©© |
|
|
|
|
|
|
| CHANNEL |
|
@ |
|
|
| 0 |
|
|
|
| VOLUME |
| |
|
|
|
|
| |
|
|
|
| G | ® |
|
|
|
|
| |
@ |
| CS | PC | MUTE | ® |
|
| o. |
| ||
|
|
|
|
| |
@ |
| oQ |
|
|
|
@ | ANT | CLEAR | DISPLAY |
| |
| PROG | ® | |||
| PLAY | PAUSE | STOP | ||
| REWIND |
| FF | RECORD |
|
@
@ | ZOOM | OUT |
O<3 | ||
@ | O© | FRZ |
| CHAN |
GUIDE
(_TV Button
•Turns on "IV and puts remote in "TV Mode" so that the other remote buttons will control the TV.
•Displays time (if clock has been set) and channel number on the "IV screen.
Important Note: Some buttons on the remote control will not control the TV unless the remote is in the "TV Mode". If another component button (such as VCR2) is pressed, the remote will go into the "VCR Mode" and will control a compatible VCR. To get back into the "TV Mode", simply press the button labeled TV. The remote will go back into the "TV Mode" and will control the TV again.
®
®
(_ VOLUME Buttons
•Press VOLUME up to increase volume.
•Press VOLUME down to decrease volume.
(_ MUTE Button
•Press MUTE to quickly reduce sound to minimum level without affecting the picture. This is especially useful during telephone calls or other interruptions.
•When the sound is muted, the word MUTE will be displayed on the screen.
•To restore sound, press MUTE again or press VOLUME up.
(_) CHANNEL Buttons
•Press CHANNEL up to select the next higher channel in channel memory.
•Press CHANNEL down to select the next lower channel in channel memory.
•You can add or erase channels in memory as desired. Details are on page 24.
(_PC (Previous Channel) Button
•Pressing the PC button causes the TV, to change back to the last
tuned channel. This is useful should you want to monitor two channels.
•To operate, select the first channel you wish to watch. Then select the other channel by pressing two number buttons (for example, press 0 then 6 for channel 6). The TV will now change back and
forth between the two channels each time you press the PC button.
10