FEATURES AND MENUS
Channel 3 Choose this if your component is connected to the antenna jack on the back of the TV, and you want the TV to tune to channel 3 when you press the specified component button. Reminder: Make sure the component’s Ch 3/4 switch is set to channel 3.
Channel 4 Choose this if your component is connected to the antenna jack on the back of the TV, and you want the TV to tune to channel 4 when you press the specified component button. Reminder: Make sure the component’s Ch 3/4 switch is set to channel 4.
Video 1 Input Choose this if your component is connected to the INPUT1 jacks on the back of the TV and you want the TV to tune to VID1 (SVID1 if you used an
Video 2 Input Choose this if your component is connected to the INPUT2 jacks on the back of the TV and you want the TV to tune to VID2 (COMP2 if you used the Y PB PR jacks) input channel when you press the specified component button.
TIME MENU
Sleep Timer Displays a control panel that lets you select the amount of time you want to give the TV before it shuts itself off.
Schedule Displays a control panel that lets you set up a schedule for turning the TV on and off automatically. Make sure to turn the schedule on. The
Set Time Displays a control panel that lets you enter the current time. The
MAIN MENU
1 Audio
2 Picture Quality
3Screen
4 Channel
5 Time
6 Parental Controls
TIME
7 GUIDE Plus+ Menu
8Setup1 Sleep Timer
0 Exit2 Schedule
3 Set Time
0 Exit
SETUP MENU
The setup routine is discussed earlier in the manual in the Interactive Setup section.
The first screen of the Interactive Setup appears automatically when you turn on your TV for the first time or after a power outage.
You can also access the Interactive Setup from the Main Menu.
TV MAIN MENU
1 Audio
2 Picture Quality
3Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 | Setup |
|
|
0 | Exit | SETUP |
|
Would you like to begin Setup now?
1 Begin setup now
2 Cancel setup
35
