RCA PHD50300 manual Using Your Remote Control, Programming the Remote, Inserting Batteries

Connections and Setup

Installing the batteries

	POWER STANDBY
INPUT SELECT			VOLUME
			Approx.
30°		30°	7m/23 ft.
		+
	C
1	2	3
4	5	6
7	8	9
	0

Using Your Remote Control

Inserting Batteries

1.Remove the battery compartment cover from the remote control.

2.Insert batteries (included) as shown on the diagram inside the battery compartment.

3.Replace the battery compartment cover.

Use your remote control from a distance of about 7m/23 feet from the monitor’s remote control sensor and at a horizontal angle of within 30° . The remote operates on line of sight, so if ther is anything blocking the path between the remote and the remote control sensor on the front of the monitor, the remote may not work.

•Don’t expose the remote control sensor on the front of the monitor to direct sunlight or strong artificial light.

•Don’t get the remote control wet.

•Avoid heat and humidity.

•When not using the remote for a long period of time, emover the batteries.

Programming the Remote

The universal remote control that came with your monitor is already programmed to operate most RCA, GE, and PROSCAN VCRs, DVD players, laserdisc players, and satellite eceivers. This remote is also capable of operating many other brands of emoter-controllable electronic components, but you must program it to do so.

Find Out If You Need to Program the Remote

To determine whether the universal remote needs to be programmed,

turn on one of your components, such as a VCR. Point theemoter control at the component and press the component button (for example, the VCR button). Now press the ON•OFF button on the emoter. If the component doesn’t turn off, you need to program the remote control in order for it to operate that component.

Chapter 1 15