RCA PHD50300 manual Setting the Power Saver for Computer Images, POWER/STANDBY indicator

The Menu System

FUNCTION
DISPLAY		: ON
MENU ADJUST	:		1
POWER SAVER		:	ON
GRAY LEVEL	:		3
FILM MODE		: ON
RGB3 ADJ.	: 1

SCREEN SAVER

RESET

SEL. ADJ. RETURN

This is the FUNCTION menu with the POWER SAVER option highlighted.

Setting the POWER SAVER for Computer Images

The POWER SAVER function can be used when the signal source to the monitor comes from a computer conforming to the VESA DPMS format. This function automatically reduces the monitor’s power consumption if no operation is performed for a certain amount of time. POWER SAVER can be turned on or off.

If the computer’s power isn’t turned on or if the computer and selector tuner are not properly connected, POWER SAVER is set to OFF.

For instructions on using the computer’s power management function, see your computer’s operating manual.

To turn the monitor’s POWER SAVER function on or off:

1.From the main menu, highlight and select FUNCTION. The FUNCTION menu is displayed.

2.Highlight the POWER SAVER option.

3.Use the button to toggle the setting ON or OFF.

4.You can continue making adjustments in the FUNCTION menu, return to the previous menu by pressing the GO BACK button or press CLEAR to exit the menu system.

The POWER/STANDBY indicator shows the status of the POWER SAVER function. See below for status and description.

POWER/STANDBY indicator

POWER	POWER/
SAVER	STANDBY	Power Saver
Mode	indicator	Operating Status	Description	Turning the Picture Back On
On	Green	Not activated	Horizontal and vertical	Picture already on.
			synchronizing signals are
			present from the computer.
Standby	Yellow	Activated	No horizontal synchronizing	Use the keyboard or mouse.
			signals are present from the	The picture reappears immediately.
			computer.
Suspend	Red	Activated	No vertical synchronizing signals	Use the keyboard or mouse. The
			are present from the computer.	picture reappears, but more slowly
				than when in standby mode.
Off	Red	Activated	No horizontal and vertical	Use the keyboard or mouse. The
			synchronizing signals are present	picture reappears, but more slowly
			from the computer.	than when in either standby or
				suspend mode.

Chapter 6 33