RCA PHD50300 manual Adjusting the Picture Position and Size, Auto Picture

The Menu System

Adjusting the Picture Position and Size

The SCREEN menu lets you adjust the position and size of the picture.

The first two options, V-POSITION and H-POSITION, adjust the placement of the picture on the screen. For example, if the picture is too far to the left, you can use the H-POSITION to move it to the right. To adjust the position of the picture on the screen:

	SCREEN
	: NORMAL
MODE

V-POSITION

H-POSITION

V-HEIGHT

H-WIDTH

SEL. ADJ. RETURN

The SCREEN menu with the MODE option highlighted.

	S C R E E N
MODE	: FULL
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE : OFF
FINE PICTURE
PICTURE ADJ.
SEL.	ADJ.	RETURN

1.From the main menu, highlight and select the SCREEN option. The SCREEN menu is displayed.

2.Use the ▲ and ▼ buttons to select the mode you want to change.

3.When the desired mode is highlighted, press the button. The selected mode screen will be displayed.

Use the arrow buttons to adjust the position of the picture.

NOTE: If you don’t push the an arrow button within 5 seconds, the current setting is accepted and the previous screen reappears.

4.When you’ve adjusted to the desired setting, press the GO BACK button on the remote to return to the SCREEN menu.

The V-HEIGHT and H-WIDTH options expand and contract the size of the picture to fill the screen. For example, if the picture is slightly wider than the screen, you can use the H-WIDTH option to shrink the picture horizontally.

Note: These options are not available in STADIUM mode.

To adjust the screen size:

1.Select the desired option from the screen menu and press the button. The selected mode window will be displayed.

2.Use the arrow buttons to adjust the size of the picture.

NOTE: If you don’t push an arrow button within 5 seconds, the current setting is accepted and the previous screen reappears.

3.When you’ve adjusted to the desired setting, press OK to select and return to the SCREEN menu.

Auto Picture

The AUTO PICTURE option only appears if you have a computer connected.

The AUTO PICTURE function appears in the SCREEN menu only if you have a computer connected to the monitor. When this feature is turned on, it automatically adjusts flickering and striped patterns in a computer image. If you want to adjust these manually:

1.Select the AUTO PICTURE option from the SCREEN menu. Press the

button to turn AUTO PICTURE off. When AUTO PICTURE is turned off, the FINE PICTURE and PICTURE ADJ. options are displayed beneath it.

2.Select an option and press the button. The screen for that option will be displayed. Use the and buttons to adjust that option. Press OK to return to the SCREEN menu.

Chapter 6 31