RCA pmn manual Safety Information, Care and Cleaning

SAFETY INFORMATION

WARNING

To reduce risk of fire or shock hazard, do not expose this receiver to rain or moisture.

Cautions

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE WARNING COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

RISK OF ELECTRIC SHOCK REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DO NOT OPEN

This symbol indicates	This symbol indicates
“dangerous voltage” inside the	important instructions
product that presents a risk of	accompanying the product.
electric shock or personal injury.

Do not stack electronic components or other objects on top of the DSS® Receiver. The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver and other components.

Do not stack the DSS® receiver on top of a “hot component” such as an audio power amplifier.

FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it.

Note to Cable TV Installer:

Note to Satellite Dish Installer:

This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

This reminder is provided to call your attention to Article 810 and in particular article 810-15 of the National Electrical Code which covers proper installation and grounding of television receiving equipment as well as to article 820-40 of the National Electrical Code which specifies that the satellite dish cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

IMPORTANT NOTICE:	This device incorporates an anticopy process technology that is
	protected by U.S. patents and other intellectual property rights. The
	anticopy process is licensed for non-commerical, home use only. Reverse
	engineering or disassembly is prohibited.
Care and Cleaning:	Use a soft cloth or dusting attachment of your vacuum cleaner to dust
	your DSS® receiver. Remove dust from the ventilation holes on the top
	and bottom.
	Plastic surfaces are easily scratched and can be marred by alcohol and
	various solvents. Avoid excessive use of oil-based furniture polishes
	since the materials used in the cabinet will accumulate more dust. A
	non-abrasive, anti-static cleaner/polisher is recommended.