THE MENU SYSTEM
HOME CONTROL
Home Control lets you remotely control several lamps and appliances through your DSS® receiver.
Home Control setup
The Home Control Data Interface connects to the LOW SPEED DATA port on the back of the receiver. Once connected, you must tell the receiver to use this port for Home Control.
1.Press MENU•SELECT to bring up the Main menu.
2.Point to and select Options.
3.Point to and select System Options.
4.Point to and select Data Port and choose Home Control as the default setting
Device Setup
1. From the Main menu select Home Control.
Home Control can control several devices.
2.Select a device you would like to control.
3.Complete the
Keep track of devices by assigning a label.
To control devices, you must connect a Home Control Data Interface to the receiver and a remote module to the device you want to control. The Home Control Data Interface connects to the LOW SPEED DATA port on the back of the receiver.
LOW SPEED DATA PORT
Once connected, you must tell the receiver to use this port for Home Control.
These devices are available as accessories sold through your digital satellite dealer or the accessories order form at the back of this book.
52
