THE MENU SYSTEM
REDUCING NOISE IN THE PICTURE
Noise is a term used to describe extraneous bits of information in the signal that affect the clearness of the picture. You can use the Noise Reduction (NOISE REDUCE) setting if your reception is poor or when playing video tapes that have poor picture quality.
The NOISE REDUCE option has four settings, including OFF. The higher the setting, the stronger the effect. The settings switch as follows when the 
button is pressed:
To change the noise reduction setting:
1.From the PICTURE QUALITY menu, highlight the NOISE REDUCE
option, and select it by pressing the 
button. The NOISE REDUCE SCREEN is displayed.
2.Use the 
and 
buttons to select the desired noise reduction setting.
NOTE: If you don’t push the 
or 
button within 5 seconds, the current setting is accepted and the previous screen reappears.
3.When the desired setting is displayed, press OK to return to the PICTURE QUALITY menu. You can continue adjusting picture settings, return to the main menu, or press CLEAR to exit the menu system.
PICTURE QUALITY
CONTRAST |
|
|
BLACK LEVEL |
|
|
SHARPNESS |
|
|
COLOR |
|
|
TINT | R | G |
PRESETS | : | MEMORY |
COLOR TEMP. | : | WARM |
NOISE REDUCE : | HIGH | |
SEL. | ADJ. | RETURN |
This is the PICTURE QUALITY menu with the NOISE REDUCE (noise reduction) option highlighted.
|
|
NOISE REDUCE | : HIGH |
|
|
This is the NOISE REDUCE (noise reduction) screen.
27
