SETUP AND CONNECTIONS
CONNECTING YOUR VCR OR LASERDISC PLAYER
Use common RCA cables (not provided) to connect your VCR or laserdisc player to your Cinema Screen monitor. To connect your VCR or Laserdisc player:
1. | Turn off the power to the monitor and VCR or laser disc player. |
|
2. | Connect one end of your RCA cable to the video output connector on |
|
| the back of your VCR or laser disc player. Connect the other end to the |
|
| video input on the monitor. |
|
3. | Use standard RCA cables to connect the audio from your VCR or laser |
|
| disc player to AUDIO2 input jacks on the monitor (if your VCR or laser |
|
| disc player has this capability). Be careful to keep your right and left |
|
| channel connections correct for stereo sound. | RCA cables (audio/video cables) are sold as a bundled set. |
4.Turn on the Cinema Screen monitor and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player user’s manual for more information about your equipment’s video output requirements.
CONNECTING YOUR DVD PLAYER
To connect your Cinema Screen monitor to a DVD player:
1.Turn off the power to the monitor and DVD player.
2.Use a standard video cables to connect your DVD player to the CMNT1 input on the monitor, or use the DVD player’s
3.Turn on the monitor and the DVD player.
CONNECTING A PERSONAL COMPUTER
If you are connecting a computer to the monitor, you must attach ferrite cores to both ends of the DVI cable to meet FCC standards (see page 6).
If you have a computer with digital RGB output, connect it to the RGB3 jack on the monitor.
For IBM VGA (or compatible) or Macintosh (or compatible) connect to the
RGB1 jack on the monitor.
10
