Samsung DVD-R150/AUS, DVD-R155/XEC, DVD-R150/EUR, DVD-R155/EUR Case 1 Connecting to your TV, Images

▌Case 3 : Component Video output jacks

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y, PB, PR) jacks on DVD Recorder and COMPONENT IN (Y, PB, PR) jacks on your TV.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV (or AV amplifier).

(See pages 18-19)

Up	3. After connecting, refer to the page 29 to 30
&Setting
	• You will enjoy high quality and accurate colour reproduction
	images.
Connecting
	green	red	blue	green
	blue
	red

■ The Component jacks will not output video resolutions above 576p.

To view 720p and 1080i connect the DVD Recorder to your TV with the supplied HDMI cable.

With HDMI connected, press the P.SCAN button to alternate between all available resolutions.

(See page 31)

■Make sure that the colour coded connections match. The Y, PB, PR component output jacks of your

DVD Recorder must be connected to the exact corresponding component input jacks on your TV.

■Progressive setting is only available when the Video Out is set to Component. (See page 30)

Other type of connecting the Audio output cable

There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below.

•Case 1 : Connecting to your TV

•Case 2 : Connecting to a stereo amplifier with AV output jacks

•Case 3 : Connecting to an AV amplifier with a digital output jack

Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of DTS, Inc.

▌Case 1 : Connecting to your TV

If your TV has audio input jacks, use this connection.

yellow	red	white	yellow
white
red

English - 18