Sound |
|
▌ |
|
No sound. |
|
Checkpoint 1 | Are you watching a programme in slow or |
| skip mode? |
| If you are playing a programme at a speed |
| other than normal or fast 1 speed, sound will |
Abnormal HDMI output screen.
Checkpoint 1 If snow noise appears on the screen, it means that TV does not support HDCP
HDMI output Jitter
| not be heard. |
Checkpoint 2 | Check the connections and settings. |
| (See pages 18, |
Checkpoint 3 | Check whether the disc is damaged. |
| Clean the disc, if necessary. |
Checkpoint 4 | Check whether the disc is inserted correctly |
| with the label facing up. |
No audio output. | |
Checkpoint 1
Checkpoint 2
Checkpoint 3
Check your TV system setup correctly.
Screen Jitter may occur when the frame rate is converted from 50Hz to 60Hz for 720p/1080i HDMI (High Definition Multimedia Interface) Output.
Please refer to the user’s manual of your TV.
Checkpoint 1 | Check whether you have selected the correct |
| digital output options in the Audio Output |
▌Remote Control Unit
The remote control doesn't work.
Options menu. (See page
Timer Recording |
▌ |
Timer lamp flickers. |
Checkpoint 1 Check there is enough space in the disc for |
recording. |
Checkpoint 1
Checkpoint 2
Checkpoint 3
Point the remote control at the remote control sensor on your DVD recorder.
Allow for proper distance. Remove obstacles between your DVD recorder and the remote control.
Check whether the batteries are empty.
Check for the TV or DVD selection button.
Checkpoint 2 | Check whether the current disc is recordable |
| or not. |
| Make sure to check before the start time of |
| recording. |
Timer recording does not work properly.
Checkpoint 1
Checkpoint 2 | Recording will be cancelled if the power is |
| interrupted due to a power failure or another |
| similar reason while recording. |
▌HDMI (DVD-R155 only)
No HDMI output.
Checkpoint 1 Check the Video output is HDMI enabled.
Checkpoint 2 Check the connection between the TV and
▌ |
|
|
|
Other |
|
|
|
I forgot my password for parental supervision. | |||
Checkpoint 1 | Press and hold down the STOP ( |
| ) button |
| |||
|
| ||
| on the front panel of the DVD Recorder | ||
| simultaneously for more than 5seconds with | ||
| no disc in the DVD Recorder. All settings | ||
including the password will revert to the factory settings.
Do not use this unless absolutely necessary. (Note that this function is possible only when no disc is inserted.)
Is it possible to change a subtitle and an audio signal on a recorded disc?
Checkpoint 1 | A recorded disc is played with only the |
| subtitle and the audio signal which were |
| selected during recording. |
Other problems.
A
the HDMI jack of the DVD Recorder.
Checkpoint 3 See if your TV supports this 576p/720p/1080i DVD Recorder.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Read the table of contents and then find and read the section describing your problem, follow the instructions given.
Turn your DVD recorder off and on.
If the problem still persists, contact a nearby Samsung service centre.
Information dditional
English - 71