Recording
Record Mode SP (02:12)
DV
The DV device is connected.
MOVE | OK | RETURN |
|
|
|
■ You can not change the recording mode and the PROG while recording.
■Up to 99 titles can be recorded onto a
■Recording will stop automatically if there is no free space left for recording.
■Recording will stop automatically if a copy protected image is selected.
■
■Do not use
Copying from a Camcorder
You may control the Camcorder using the IEEE1394 (DV) interface.
Before you start
Check that the disc has enough available space for the recording. Adjust the recording mode.
1.Press the OPEN/CLOSE button, place a recordable disc on the disc tray.
2.Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel display.
3.Press the REC MODE button repeatedly to select the recording speed (quality).
SP LP EP XP
4.Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of the screen.
5.To play the camcorder and find the starting point to be copied, select the play icon () on the top of the screen using the ◄ ► buttons and then press the OK button.
6.To start recording, select the record icon () on the top of the screen using the ◄ ► buttons and then press the OK button.
You can also use the REC button on the remote control to start recording. (If your camcorder is in stop mode, the REC button doesn't work.)
To stop recording
Press the STOP button to stop or finish a recording in progress.
•When using
English - 38