Auto Channel Memory
17%
Stop
| Auto Setup | |
No Disc |
|
|
Date |
| Time |
JAN | 01 | 2007 12 00 |
MON |
|
|
MOVE | OK | RETURN |
|
|
|
| Clock Set | ||
No Disc |
|
|
|
Programme |
|
|
|
|
|
|
|
Setup | Date | Time |
|
| JAN 01 | 2007 12 | 00 |
| MON |
|
|
MOVE OK RETURN EXIT
6.Auto Channel scan will be started.
•The number of stations automatically stored by the DVD Recorder depends on the number of stations that it has found.
7.Check the date and time.
•if it is : Correct, press the OK button then the date and time will be saved. If you don't press the OK button, the date and time will be saved automatically after 5 seconds.
•if it is : Incorrect, input correct Time, Date, Year using ▲▼◄ ► buttons or number buttons. Press the OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually.
■ Now, DVD Recorder is ready for use. Function for “Plug & Auto Setup” is fixed already. So if you want to change this fixed one, you can change it by Presetting the Stations in OSD “Presetting Channels with the Manual setup function” menu. (see page 24)
Setting the Clock
This menu is used to set the current time.
You need to set the time to use timer recording.
1.With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.
2.Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3.Press the ▲▼ buttons to select Clock Set, then press the OK or ► button. Use the ▲▼◄ ► buttons to input Time, Date or Year. Use number buttons to input clock data directly.
4.Press the OK button, then the date and time will be saved. If you don’t press the OK button, it will not be saved.
English - 23