RCU1000B_IB.qxd 10/9/01 11:09 AM Page 9
Quick Reference Guide continued
To set the LCD on time:
Enter Setup by pressing and holding the SETUP key, then release… Press SETUP repeatedly until Set More Options? is displayed….
Press and release OK…
Press the UP or DOWN key until Set LCD On Time? appears….
Press the release OK…
Press the UP or DOWN key to change the on time of the LCD screen…
NOTE: The time intervals that can be set are in 10 second increments.
Press and release OK...
Press and release OK to confirm...
Press and release EXIT then OK to return to normal operation.
To set the light on time:
Enter Setup by pressing and holding the SETUP key, then release… Press SETUP repeatedly until Set More Options? is displayed….
Press and release OK…
Press the UP or DOWN key until Set Light On Time? appears….
Press the release OK…
Press the UP or DOWN key to change the Light on time…
NOTE: The time intervals that can be set are in 10 second increments.
Press and release OK...
Press and release OK to confirm...
Press and release EXIT then OK to return to normal operation.
Direct Code Entry
1. Manually turn on device to be controlled.
2. Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode.” Release the SETUP key.
3. Press and release desired device key (TV, VCR, SAT, etc.) on the LCD. The LCD displays the current device and code. For AUX, press and release AUX key followed by desired device key that you want to make the AUX key become.
NOTE: If you do not press a device key after pressing AUX then AUX will be a Cable device.
4. Enter the 3 digit code from the Code Tables (pages
NOTE: For an incorrect Code entry, the LCD displays “Invalid Entry Made” for two seconds before displaying “Code SetupÉ.Mode?”and no changes are made.
5. If a valid code has been entered, press EXIT on the LCD. Direct Code entry is now complete.
9
