To Delete a Macro, Reset All, Exit Setup

RCU1000B_IB.qxd 10/9/01 11:09 AM Page 24

To Delete A Macro

1.Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.

2. Press the MACRO key twice, and “Delete a Macro?”
appears in the LCD. Press and release OK on the LCD.	x2

3. The LCD displays “Delete a Macro?”. Press and release the MACRO key (1-9)to select the Macro you want to delete.

NOTE: When deleting a Macro, only the programmed Macro key (s) will be highlighted on the LCD.

4. The LCD displays “Confirm to Delete?”. Press and release OK on the LCD.

5.The LCD displays “Delete a Macro” or “Setup a Macro?” If no more Macros need to be removed continue to next step.

6.Press EXIT on the LCD. Macro key deletions now complete.

To Clear all stored Learned Commands, Timer Events and

User Programmed Codes, i.e. return to factory defaults...

1. Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.

2. Press and release the SETUP key repeatedly until “Reset ALL?” appears in the display.

3. Press and release OK on the LCD screen.

4. “Confirm to Reset?” is displayed. Press and release the OK on the LCD. The remote returns to normal operation screen.

5. All settings are now reset to the factory default.

At any time you are in Setup Mode you can simply exit and return to normal operation by following the below procedures.

1. Press and release the SETUP key repeatedly until “Exit Setup” appears in the display.

2. Press and release OK on the LCD screen.

3. The remote is now in normal operation mode.