RCU1000B_IB.qxd 10/9/01 11:09 AM Page 20
To Learn Commands
Gather all the remotes that you want to learn and have them all lined up on a flat surface before going into Learn Setup Mode. Place the RCU1000B in front of your existing remotes so that the front of your existing remotes point at the back of the RCU1000B. Make sure that you keep about 2 inches between the remote you are learning from and the RCU1000B.
2 inches
1.Press and hold the SETUP key until the LCD displays “Code SetupÉ.Mode?” and the LED remains on. Release the SETUP key.
2.When you press the LEARN key at this point the LCD displays “Learn IRÉ.Mode?”.
3.Press and release the desired device key (TV, VCR, SAT, AUX, etc.) “Learn IRÉ.Key?” is displayed.
4.To teach a key on the RCU1000B, press and release the LCD key, or the Quick key, that you wish to program.
NOTE: You cannot learn any commands under the Learn, Macro, Setup, or any device key.
5.“Learning...Please Wait” is displayed. Press and hold the original remote key you want to transfer to the RCU1000B until “Success” followed by “Learn IRÉ.Key?” appears in the display (this process can take 2 or 3 seconds to complete). Release the original remote key. If there is a problem with learning the LCD shows “Learn....Error” for 3 seconds but still remains in the Learning Setup.
6.Repeat Steps 4 and 5 for other keys to be learned.
NOTE: To manually record your learned keys for future reference refer to page 21.
Press Any Key Except...
7.Press and release the SETUP key when all desired original remote commands have been learned.The LCD displays “LearningÉCompleted” followed by “Learn IRÉ.Mode?”.
8.Press EXIT on the LCD. Learning is now complete.
20
