CASSETTE DECK CONTROLS AND OPERATIONS
RECORDING FROM THE RADIO
1.Insert a cassette tape into Deck 1.
2.Choose the Tuner function. Press the BAND button to chose a frequency. Use the TUNING UP (+) or DOWN
3.Press RECORD to ready deck and then PLAY to begin recording.
4.Press STOP to end recording.
RECORDING FROM THE CD PLAYER
1.Insert a cassette tape into Deck 1.
2.Choose the CD function.
3.Insert the disc(s) to be recorded. You can start with any track on a disc or you can create a program to record.
4.When ready to begin taping, press RECORD and then PLAY on the Tape deck. The system will automatically signal the CD to simultaneously begin the CD playing and the tape recording.
RECORDING FROM TAPE TO TAPE
1.Insert the prerecorded tape you want to record into Deck 2.
2.Insert a blank tape into Deck 1.
NOTE: The system will enter Dubbing or High Speed Dubbing mode only if both tape decks are occupied. However, the system will not enter either mode if the erase protection cap of the cassette in Deck 1 has been removed.
3.Press the DUB (dubbing) button.
4.Press only one of the flashing PLAY buttons on either deck to begin recording.
5.Press STOP at any time to stop recording.
NOTE: Pressing PAUSE will change the DUB function to the normal recording function.
HIGH SPEED DUBBING
1.Follow steps 1 and 2 from above.
2.Press the HIGH SPEED DUB button.
3.Press only one of the flashing PLAY buttons on either deck to begin recording at almost twice the normal speed.
4.Press STOP at any time to stop recording.
NOTE: PAUSE will not work during High Speed Dubbing.
DON’T INFRINGE!
This product, used for the purposes for which it is sold - i.e., entertainment, violates no copyright law. Any attempts to use this product for that which it was not intended is unlawful and therefore not condoned by Thomson Consumer Electronics.
15
