CASSETTE DECK CONTROLS AND OPERATIONS
RECORDING FROM THE TV,
VCR OR VIDEO
Your system is capable of recording audio from a TV program, VCR tape or videotape.
1.Insert a cassette into Deck 1.
2.Choose the function - TV, VCR or Video.
3.Choose the TV program or segment of VCR or videotape you want to record.
4.Press RECORD on the tape deck to ready it and then PAUSE on the tape deck.
5.Press PLAY to release the tape whenever you are ready to begin recording.
ERASE PROTECTION
When you record new material, the cassette deck records over whatever is on a tape. To protect a tape from accidental erasure, break off one or both plastic tabs - one for each tape side - on the top of the cassette tape. If you decide later to record on the tape, seal the hole with a piece of cellophane tape.
A
60 | A |
|
A | A |
QUIT SLACKING
A little bit of slack in your tapes can cause scratches on the tape, or worse yet, the tape could break. If you notice some slack in the tape, use a pencil to tighten it up before you insert it.
A
We’re on the Level
The
16