RECEIVER CONTROLS & OPERATIONS
TO STORE A STATION
1.Press the FM/AM button on the receiver (or the AM•FM button on the remote) to turn on the receiver.
2.Select the
3.Select the station you want to store in memory using the methods described above.
4.Press the
For stations 1, 2 or 3 press 0, then press 1, 2, or 3. For stations 4 through 30, press the numbers directly.
If the Memory indicator on the display turns off before you preset your station selection, press
If the receiver is disconnected from its power source, the preset stations are maintained in memory for up to 7 days.
TO PLAY A PRESET STATION
Press the appropriate Preset Stations number. For stations 1, 2 or 3 press 0, then press 1, 2, or 3. For stations 4 through 30, press the numbers directly.
TO USE SWAP AUDIO
When you are watching TV and turn on PIP, you can turn on another video source and swap the sound from the large picture coming from the TV to the small picture coming from the other video source.
1.Press TV on the remote to turn on the TV and put the receiver in TV mode.
2.Press the PIP button. The empty PIP appears on the screen.
3.Activate a video source for the PIP. The picture from the video source appears in the PIP.
4.Press TV.
5.Change to the TV channel you want to watch on the
large screen.
6.Press SWAP AUDIO to swap the sound between the large picture and the small picture.
7.To swap the video between the large picture and the small picture, use the SWAP PIP button on the remote.
If you swap the TV picture to the PIP and the other video source to the large picture, you may not be able to swap
the audio.
Or, press CH + on your remote to tune to the next preset station or CH - to tune to the previous preset station.
PRESET SCANNING
Use the PRESET SCAN button on the receiver’s front panel to review the preset stations stored in the tuner’s memory. “PRESET” and the station’s location in memory appear in the display. The tuner automatically scans all preset stations in order, pausing at each one for approximately 5 seconds.
When the tuner reaches the station you want, press PRESET SCAN to stop the scanning. If the scan is not interrupted, the tuner reviews all preset stations in order, stopping at the point where the scan began.
USING SWAP AUDIO
Swap audio lets you change the sound from the large picture to the small picture when you are watching TV and using
TO CHANGE THE VIDEO SOURCE AND SWAP THE AUDIO
If you want to change the video source for the PIP and want to be able to use SWAP AUDIO:
1.Turn off PIP.
2.Change the video source to another video component connected to the receiver.
3.Press TV to watch the TV.
4.Press PIP. The video source appears in the PIP. The video from the TV appears in the large picture.
5.Press SWAP AUDIO to swap the audio as you want.
The Swap Audio feature may not work with all TV brands with the PIP feature.
If your TV has a PIP feature, see the TV’s user’s guide for instructions for using it.
10
