USING THE UNIVERSAL REMOTE CONTROL
MENU SELECT Programs the CD changer to play up to 32 tracks in any order you choose.
Number Buttons Let you enter numbers when needed.
PAUSE Pauses the CD.
PLAY Plays the CD.
RESET•REP Repeats a track, a CD or an entire program. Press once to repeat the currently playing track, twice for the CD or program, and three times to turn the function off.
REV Moves backward through the CD one track at a time.
STOP Stops the CD from playing.
PLAYLIST For some laserdisc models, if programmed, programs to playback chapters on laserdisc in a certain order.
POWER Turns the laserdisc player off.
REV Scans backward on the laserdisc.
STOP Stops the laserdisc.
PROGRAMMING THE
UNIVERSAL REMOTE
You can program the remote to control most brands of remote controllable TVs, VCRs and cable boxes. If you have an RCA, GE or ProScan VCR, you may not need to program the remote at all. Other manufacturer’s brands need to be programmed.
TAPE DECK CONTROLS
FWD Fast forwards the tape.
Number Buttons Let you enter numbers when needed.
PAUSE Pauses the tape.
PLAY Plays the tape.
POWER Turns the tape player off.
REV Rewinds the tape.
TAPE Turns on the tape player and puts the remote in tape player mode.
LASERDISC PLAYER CONTROLS
CH + and CH – Changes to the next higher or lower chapter on the laserdisc.
FWD Scans forward on the laserdisc.
LD•VCR2 For some laserdisc models, if programmed, turns on the laserdisc player and puts the remote in laserdisc mode.
Number Buttons Let you change to a specific chapter.
PAUSE Pauses the laserdisc.
PLAY Plays the laserdisc.
PROGRAMMING THE REMOTE TO CONTROL A TV
To determine whether you need to program the remote, turn on the TV, point the remote at the TV’s remote sensor and press TV. Then, press the POWER, or CH + or CH – button to see if the TV responds to the remote commands. If not, you need to program the remote.
Follow these steps to program your remote to control your TV:
1.Turn on the TV.
2.Look up your TV brand and code number(s) in the code list on the next page or on the code sheet packed with your remote.
3.Press and hold the TV button on the remote.
4.Enter the
5.Release the TV button, then press POWER to see if the TV responds to the remote commands. If not, try pressing TV
then POWER.
6.Repeat steps 3 through 5 using the next code listed for your TV brand until the TV responds to the remote commands.
If you have questions about the use of the remote buttons with another component, refer to the component’s user’s guide.
19
